LEXIA

DELPHI
سبتمبر 16, 2017
GDS
سبتمبر 16, 2017

LEXIA

 

 

 

 

 

Lexia 3/PP2000 Diagbox 7.82 963830C/4.3.3V For Citroen Peugeot Diagnostic Tools”

:Item Description
:Description

PP2000/Lexia-3 Interface works for both Citroen and Peugeot. It is compatible with most of Citroen and Peugeot cars from 1995.It support read identification, read fault codes, clear fault codes, auto-scan etc. Have multiple language for choose.
This set contain less cables, without not necessary cables, is simple version of LEXIA-3.
Lexia3 and PP2000 for Citroen/Peugeot Diagnostic with Diagbox V7.82 Software.
Sizes(Length):
Main unit with extension OBD2 cable: about 60cm/23.62″
Long USB cable: about 191cm/75.19″
Short USB cable: about 31cm/12.20″
Electric clip cable: about 191cm/75.19″

 

LEXIA-3/PP2000 Description

It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer’s experience, this item can not works good at C5 new models.
It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention before purchase.
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
LEXIA-3/PP2000 Function:Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW

 

Read identification Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc
Read fault codes Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).Program supports report printing or copy to clipboard
Clear fault codes this function clears all stored fault codes and other diagnostic information
Auto-scan (complete car scan/test) Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes
Measured Values Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis
Actuator test Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc

 

Notice

Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully
Please allow 1-3CM differs due to manual measurement
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding

What’s included

 
1 x Main unit with extension OBD2 cable
1 x Long USB cable
1 x Short USB cable
1 x Electric clip cable
1 x DVD for Diagbox V7.82 Software