سبتمبر 16, 2017
سبتمبر 16, 2017







OPCOM OP-COM V1.70 OBD2 II USB Scanner Diagnostic Tester Code Cable For Opel Car


OPCOM OP COM V2014 Auto Diagostic Tool for Opel OP-COM V1.70 Diagnostic Scanner Tool OPCOM V1.70 Super Scanner
Item Name OPCOM CAN-BUS Diagnostic Tool For Opel with PIC18F458 Chip
Item Model Op-com
Chip PIC18F458 Chip
Hardware version V1.70
Software version V2014
Software Updation Never Update Online. Online Updation Will Damage The OP-COM
Main function Diagnose and program for Opel Cars
Application for Vectra-C, for Astra-H, for Zafira-B etc.
Size 20*15*4cm
Weight 0.2Kg
OEM Accept


OPCOM 2014 diagnostic tool for Opel cars covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic. Such as diagnostic function for Vectra-C, for Astra-H, for Zafira-B etc. It lets you read and clear fault codes, support many control units. Opcom OP-Com 2014V Can OBD2 for Opel Firmware V1.70 with PIC18F458 Chip




 OPCOM is a special PC Based diagnostic interface especially for OPEL

Software Version: V2014 ; Firmware Version: V1.70

Never Update Online. Online Updation Will Damage The OP-COM


 It covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B etc

The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test

The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples

 Since many pins used in the OBD connector for Opel, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

 Fault codes will be shown with all available information

Full Fault Code Text Description

 Full status information (Present, Not present, Intermittent

 You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window

 The program shows you measuring block information on many control module, you can choose anything from the list on your own

 The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast

You can also run output tests on many controllers




HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps

MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps

SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps


Carton box packing, or OEM as your request

:Packing list

1pc x OP-COM Interface
1pc x USB Cable
1pc x CD with Software and Drivers